stirring process meaning in English
随机过程
Examples
- Research status and prospect of friction stir welding and friction stir processing
搅拌摩擦焊接及其加工研究现状与展望 - Using the special stirring equipment and the optimized stirring processing , some semi - solid al matrix in - situ composites slurry with small size of al3fe reinforcement phase and even distribution of reinforcement particles in mixing melts are achieved
在专用搅拌设备与优化设计后的搅拌方案共同作用下，能获得具有细小的强化相，且强化相粒子在熔体中分布均匀的半固态铝基原位复合材料浆料。 - The results indicated : 1 ) the friction interface can transfer continuously and stably with the imbalance cooling thermo - induce . ultra - fine grain column part can be prepared through it . and ultra - fine grain flat part can be obtained through jointing several ultra - fine grain strips in cooling friction stir processing 2 ) the refined grain size and the hardening result are mostly affected by the rotate speed , the friction press and the deformating temperature
实验结果表明： ( 1 )通过不平衡冷却的热诱导作用，实现了棒材摩擦界面的持续、稳定转移，得到了棒状超细晶组织；通过强冷搅拌摩擦工艺进行细晶带合并，能够得到板状的超细晶组织。 - Based on the analytical result of stirring kinetics , the maximal affecting factors to the size and distribution homogeneous degree of intermetallic al3fe reinforcement phase in al matrix during the stage of heat preservation stirring are studied , and some important parameters of stirring equipment and stirring process are ascertained , and the stirring processing is optimized
根据搅拌动力学分析的结果，研究了搅拌过程中对金属间化合物al _ 3fe强化相尺寸大小和分布均匀度的影响的因素，确定了搅拌设备和搅拌过程的几个重要参数，并对搅拌工艺进行了优化设计。 - According to the phenomenon of friction interface transferring , two techniques of processing ultra - fine grain material were advanced to develop new method of preparing large bulk of ultra - fine grain material efficiently and economically . the first is the friction interface thermo - induced transfer method ( fitt ) for column part , and the second is the cooling friction stir processing ( cfsp ) for flat part
为探索一种高效率、低成本制备大块超细晶结构材料的新方法，本文按照摩擦压扭强变形区连续转移的总体思路，提出了两种具体的制备工艺： ( 1 )适用于棒材的摩擦面热诱导转移法， ( 2 )适用于板材的强冷搅拌摩擦工艺。